Debugging the worst-case scenario: it's not your fault; & Windows-devs matter! ✊
How I obtain my first PullShark badge? Is Windows developme easy? Does Rust's expect() work as expected? Ever debugged a dependency issue?
TLDR;
I am using windows for other vital reasons(not gaming). I wanted to embed a rust crate which is supposedly cross-platform. But since windows development is overlooked, it was not easy as it sounds. Here's my write-up on debugging the hell out of a fairly large codebase. This is one of the worst-case scenarios where the problem is not you, but the dependency of the dependency that you depend on. Watch me hop rust to C then to GNU Posix utils and back to Windows.
Disclaimer
I am NOT nit-picking on surrealdb community. This is just an example. The maintainers pull the PR right away like they were waiting on someone to do this. The surrealdb community is the first most active community I have seen so far other than live O*lyFa*s 😅.
The Problem Definition
I was working on a side project using Tauri back in Aug. 2022. For data persistence I decided on SQLite, then this video from fireshipio.
Just found What I needed!
So, I went ahead and looked at the LICENCE, it permitted use in the app (but not as a separate service). I cloned it, and start migrating from SQLite to SurrealDB! Took me a couple of days to adopt but the codebase was well documented so, ON PAPER everything was sound! Execute cargo tauri dev
🚀
🤦♂️ Should have used rust-analyzer.
My app no longer compiles. No this is not about rust being picky about borrows and such. It was something else ( spoiler: it's the dependency of a dependency )
Disclaimer 2
This happened almost half a year ago, I can't replicate exactly what happened because a lot changed since then. You have to take my word here and there.
The NOW problem
My build failed. So I started digging into my code, maybe it's me I guessed at first. I commented out new snippets of codes, and tried println!
every single lexeme.
I get it, but let's just say it, we teach and preach debug!(_)
is the way to do it, but end up println("{:#?}", _)
at the end of the day.
Nope! my binary crate should compile for either println!
and debug!
to work. 🤦♂️
The rustc to rescue 🦸♂️
One thing rust brings to take other than security and low-level control is the best compiler error messages. It even suggests what to do sometimes, but my fate it did not do a better job. But I vaguely remember it did 😅.
GOLDEN RULE when your code doesn't compile: Patiently read the error message
I had to learn this the hard way 😭. I didn't read well enough but just assumed it was me who messed up. In my defense, the crate surrealdb
is of rust, cross-platform software and a binary was available from choclately by the first party! So, I presumed it is something I did.
I scorned through my codebase here and there, slapping unwrap()
and expect()
without a second thought, but nothing worked. I remember being soaked up into this, I ate dinner at 10-ish which should have been 6-ish 😖. I took a-sleep and woke up next early morning around 3 to, yeah, DEBUG 🧙♂️.
I tried all sorts of tricks, two being:
lldb: because at the end of the day, rustc converts
*.rs
intollvm
radare: individually compiled
rlibs
.
Why bizarre approach? Because I am coming from Reversing Background, these are what I have used so far. I didn't know how to debug properly back then. At last, I suspected the macros. So I examined the macro expanded rust files. Nope, I didn't see any faults as of my knowledge.
rustc -Zunpretty=expanded test.rs
Use this 👆 to see the expanded rust file.
Bugs' implicit impact on health
If you have ever been debugging, you can feel what I am tryna say. It's not just your code that is broken, but you too! I could feel my body starts to take a step back. I felt like programming isn't for me. Computer Science is not my thing. I didn't sleep well. I was stressed and depressed. I no longer felt hungry. Furthermore, I was DISAPPOINTED in myself!
I couldn't even add a dependency and get my application to compile, how am I going to solve any new challenges?
I hope you can relate when the debugging took almost 2 days 🙆♂️. I took a deep breath and decided to take a break and come fresh.
New Dawn
Instead of continuing, I decided to start fresh. You know that weird case, where restarting the computer fixes some issues! Same here. I executed
rm -rf ./out/ && \
cd src-tauri && cargo clean
Then tried to compile it again with
cargo tauri dev
It failed. Still not following the GOLDEN RULE, I decided to analyze the generated pdb
. Then It hit me. I couldn't find neither rlib nor pdb for my binary crate. That's when I went back and read the error message.
The compiler never got to my crate, it failed during the compilation of a dependency crate called rquickjs
.
LIBCLANG_PATH not found
is the essence. But, why the hell does a rust crate require a C compiler 🤷♂️. So I dug into the rabbit hole. The culprit is allegedly
C:\Users\b\.cargo\registry\src\github.com-1ecc6299db9ec823\bindgen-0.60.1\src/lib.rs:2172:31
Module's doc is
//! Generate Rust bindings for C and C++ libraries.
//!
//! Provide a C/C++ header file, receive Rust FFI code to call into C/C++
//! functions and use types defined in the header.
//!
//! See the [`Builder`](./struct.Builder.html) struct for usage.
//!
//! See the [Users Guide](https://rust-lang.github.io/rust-bindgen/) for
//! additional documentation.
So, FFI I presume. 🤦♂️. dependency rqucikjs
uses bindgen
to crate FFI to use some C library.
Yes, there's a teeny-tiny chance surrealdb can seg-fault which this video claims it can't implicitly.
What C library? libclang.dll
? I have the entire suite of LLVM 13 on my machine. So I went ahead and peeped into build.rs
for these bindings. The main
being
fn main() {
target::main();
testgen::main();
// On behalf of clang_sys, rebuild ourselves if important configuration
// variables change, to ensure that bindings get rebuilt if the
// underlying libclang changes.
// buch of println snipped for brevity
}
{target, testgen}::main()
🤔wonder what they do.
// target::main
pub fn main() {
let out_dir = PathBuf::from(env::var("OUT_DIR").unwrap());
let mut dst =
File::create(
Path::new(&out_dir).join("host-target.txt")
).unwrap();
dst.write_all(
env::var("TARGET").unwrap().as_bytes()
).unwrap();
}
// testgen::main
pub fn main() {
// some snipped
let headers = match fs::read_dir(headers_dir) {
Ok(dir) => dir,
// We may not have headers directory after packaging.
Err(..) => return,
};
// --snip--
for entry in entries {
match entry.path().extension().and_then(OsStr::to_str) {
Some("h") | Some("hpp") => {
let func = entry // ... --snip--
writeln(_) // --snip--
}
_ => {}
}
}
dst.flush().unwrap();
}
They seemed to create a file specific to OS and write some tests for generated headers. Nothing extraordinary, but did you notice some ENV_VARs? Never have I ever set them. So someone up the tree bootstraps and invokes. Who is that?
rquickjs
One niche feature of surrealdb is using JavaScript (ES2020, I guess) and WebAssembly to program macros into database system (analogous to pgSQL, pg/Tcl, pg/Python etc.)
The dependency is defined as:-
[dependencies.js]
# says optional, but couldn't find a way to compile without it
optional = true
# --snip--
package = "rquickjs"
Few scroll up the error message
rquickjs
's build.rs
fn main() {
// --snip--
let src_dir = Path::new("quickjs");
// --snip--
}
rquickjs
is the port of quickjs
to rust 🤦♂️. So, that's why I need clang. Let's get the clang. Installed it and added it to the PATH 💦. Let's go 🏃♀️.
Note this ain't cargo, this is clang itself. And stdio.h
not found? that's where even Helloworld in C starts 😲. Looking at SearchPath ( aka InstallledDirs)...
I didn't have Visual Studio, just the build tools but of 2022 😒. But how the heck is trivial stdio.h
missed from mingw64? But, wait 🤚
Are you kidding me right now? Wait, notice bare-clang is gcc (the prompt) but rust invoked-clang is msvc. Changing the target triple...
Hooray 🥳 but changing the target triple is just a 🩹. Doing that with clang gives...
the same error but with a suggestion to run from dev-cmd. Let's do that! I opened the developer cmd (Start > type dev cmd 64
> this is it ✌).
Hooray again 🥳. Why? Cause the error changed! That means we somehow fixed the previous one and we are nearby success 🎉🍾. What's this?
Program Not Found
Seems like we need a binary and the error is still from rquickjs
. This makes me wish surrealdb's JS/WA macro is a bane than a boon. Nevertheless, let's read the message, and seems like line 136 causes the error.
fn patch<D: AsRef<Path>, P: AsRef<Path>>(out_dir: D, patch: P) {
let mut child = Command::new("patch")
.arg("-p1")
.stdin(Stdio::piped())
.current_dir(out_dir)
.spawn() // 👈 line 136
.expect("Unable to execute patch, you may need to install it: {}");
println!("Appliyng patch {}", patch.as_ref().display());
{
let patch = fs::read(patch).expect("Unable to read patch");
let stdin = child.stdin.as_mut().unwrap();
stdin.write_all(&patch).expect("Unable to apply patch");
}
child.wait_with_output().expect("Unable to apply patch");
}
spawn()
? Invoking an external binary. Even though expect()
is to help, it seems like it is not very useful. Very strange 🤔. Aren't rust's expect
s supposed to exit with that message if panic
should happen? unpredictable behavior of rustc?
Makes me wonder whether rust holds up to the claims the community has been making. Here seems like expect()
within spawn()
fired before user-defined expect
fired. Should std::io
functions propagate the Err
upstream instead of handling itself. Please let me know in the comments why this happens.
Back to the point. Seems like we are patching! Another layer unviels 🧅!
The patches
GNU util, patch
is used to apply diffs to files. If you have used suckless programs you should be familiar with any other bdiffs. This is why my title says
Windows-devs matter! ✊
Cross-platform is a bit of a lie in this case. Without a proper environment, surrealdb or any other crate depending on rquickjs
can't be compiled. Because the GNU util patch
isn't available by default. And at line 63-ish rquickjs/build.rs
defines the patch files.
let mut patch_files = vec![
"check_stack_overflow.patch",
"infinity_handling.patch",
"atomic_new_class_id.patch",
];
Luckily GNU utils are being ported to native NT-kernel. These can be found here. And we need this, patch. So, I extracted it to a directory that is in my System PATH and run the build again. And 🥁 please...
Wooooooo🥳🎉🍾🥂🎇🎊🎓ooooowwwwww ! 😃 It took me weeks to figure this out back then. Now, I can proudly embed the crate and continue my project.
So, What should be done?
Install Visual Studio Build Tools and Windows SDK (for
quickjs
fromrquickjs
)Get
GNU pacth
(comes bundles with Git I now realize)Run the build commands in
Developer Prompt
from Visual Studio
Like I told you, this is a WORST case scenario because conventional println
, debug
, breakpoints and pdb
s wouldn't help us. Only the compiler and patient Googling will get you going.
My first contribution to Open Source
Back then, I searched surrealdb's Discord server for answers, but none. One time someone asked about it and decided to use WSL. I could have done that but I don't have memory enough to run WSL Vmmem and 422 rustc build commands. That is the first reason I couldn't afford to run rust-analyzer in the first place. So I decided to update the doc and have them merged for others to save time and hair they would be plucking otherwise.
To my surprise, the merge was kinda instant. And that is how I earned my first PullShark badge in GitHub 🥇. The PR.
Few more disclaimers
For keen eyes, my PR suggests a different approach. That is because when I encountered the problem back then, it was how I managed to get it running. I tried replicating it for the #DebuggingFeb and end up finding a better yet less overhead way. I will make sure this alternative way is added to the docs via a new PR as well.
And, as of now (Feb 21, 2023) someone else sugar-coated the instructions and made it better than what I suggested, reducing PowerShell commands to invoke.
But elevated? [Bonus about Windows]
Yes, you need to execute the commands in the elevated shell for the patch
sys command to succeed. Why? Windows 😒. Windows implicitly assumes if a filename contains setup/patch/installer and exe, it requires Administrator rights to be invoked. Nothing serious. You can rename patch to whatever you want and can confirm it. But by then the build will fail, as it looks for patch itself.
If you put the patch inside a privileged folder (e.g. ProgramFiles etc.) this might not be necessary.
- I said surrealdb can SegFault, but it seems like taken a little bit of care, idk 🤷♂️ for sure though.
/* from: rquickjs/sys/patches/check_stack_overflow.patch */
diff --git a/quickjs.c b/quickjs.c
index 48aeffc..45077cb 100644
--- a/quickjs.c
+++ b/quickjs.c
@@ -1590,9 +1590,7 @@ static inline uintptr_t js_get_stack_pointer(void)
static inline BOOL js_check_stack_overflow(JSRuntime *rt, size_t alloca_size)
{
- uintptr_t sp;
- sp = js_get_stack_pointer() - alloca_size;
- return unlikely(sp < rt->stack_limit);
+ return unlikely(js_get_stack_pointer() < rt->stack_limit + alloca_size);
}
My learning outcomes
Read the compiler error message first without assuming it's your new snippet that messes up 🔍
Don't just underestimate yourself but underestimate the dependencies as well 😎
Cross-Platform is not "cross" always ❌
Using Linux for development will keep your a** out of pain most of the time. ⚰
Take a deep breath and Google it 🦸♂️
extra bits
quickjs: lightweight javascript engine
rquickjs: high-level bindings of quickjs to rust FFI
patch: utility used to apply the diff to a file
LLVM: a suite of frontend and backend binaries for programming languages
lldb: a debugger from the LLVM suite
radare2: a disassembler, patcher, differ, decompiler and all sorts of magical reversing utility
Visual Studio Build tools: Microsoft's softwares for compiling, linking etc. for Windows OS
mingw: a set of tools from GNU Linux
Epilogue
That's it. Seems like a hell of a long blog. But, took me weeks of depression and stress along with red fonts, LLVM docs, Windows SDK docs, and deeper research of Windows and Linux Differences to figure it out back in Sep 2022.
IDK whether this would be useful for someone else but I loved hopping from rust to C to POSIX utils and back to rust. That was quite a journey back then. And may this be an example of sometimes you need to go out of your comfy zone to get what you need.
Till I see you in the next blog, this is me the BE 👋, signing off.
Cover background by Milad Fakurian.